Product Description

8 x 12 Workshop, Cupola, Flowerbox, Additl Door, Colonial Door+- Black- No Floor- Tan Aluminum Trim Color: Black, Floor: No, Vinyl Siding Color: Tan Shed comes unpainted Features: -Comes with Cupola, Flowerbox, Additional Door and Colonial Door.-All parts are precut and ready to assemble.-2 x 4 trusses 24'' on center (OC).-Shingles.-Dripedge (an aluminum piece that goes along the edge of the roof).-Fasteners.-Floor (Purchase of floor with kit is highly recommended).-paint. Specifications: -2 x 4 wood wall framing 16'' on center OC. Dimensions: -2 working 18'' x 24'' windows with glass, grids, and shutters.-4' double door with locking handle latch.-6' High front and back walls.

Product Description

9.3 Foot DIY Wind Turbine Package for DIY Wind Turbine Plan

The package includes:

One set of 3 High Efficiency Reinforced Fiber Glass Wind Turbine Blades - 9.3 Feet diameter

Wind Turbine Hub. Nose Cone

25 super strong Epoxy+Nickel + Copper+Nickel quadruple layer coated NdFeB Neodymium magnets - Grade N42, stronger and better performance than N40, N38 and N35

11 LB Magnet wire - Original Factory Spool, genuine Essex enameled magnet wire with heavy build

Available magnet wire size in AWG for this package:

13, 14, 15, 16, 17, 18, 20, 21, 22, 24

Please read Hugh Piggott's "How to build wind turbine" book to find out the magnet wire size you need.

Heavy duty 210 amp capacity bridge rectifier to convert 3-phase AC to DC


AC connector pigtail for connection to generator


Crimp-on wire splice connectors


10-12 AWG crimp-on ring terminals


8-10 AWG crimp-on ring terminals.

Magnet Technical Specifications:

Super strong and durable magnets:

2" x 1" x 0.5" Thick Neodymium NdFeB Block Magnet, Epoxy+Nickel+Copper+Nickel Quadruple Layer Coated

stronger and better performance than N40, N38 and N35

Coating Makes a big difference !

Epoxy+Nickel+Copper+Nickel 4-layer coating vs. Nickel+Copper+Nickel 3-layer coating

Nickel+Copper+Nickel coating provides protection against moisture and oxygen but is prone to corrosion in salt and acidic conditions.

The combination of Epoxy and Nickel+Copper+Nickel coating is the best solution against both corrosion in salt, acidic conditions and moisture, oxygen.

We recommend Epoxy+Nickel+Copper+Nickel coated 2x1x1/2 magnet due to the superior Corrosion Resistance and excellent adhesion to metal surface of Epoxy+Nickel+Copper+Nickel coating than Nickel+Copper+Nickel coating.


Magnetized through the Thickness 0.5", poles are on the two 2x1" surfaces

Approximate pulling force: over 72 lbs

• 9.3 Foot (111") diameter High Efficiency Fiberglass Blades
• 25 Strong Neodymium Magnets with Durable 4 Layer Coating
• 11 LBS Essex Magnet Wire with High Temp Rating
• Steel Hub and Nose Cone
• 210 amp bridge rectifier to convert 3-phase AC to DC

Product Description

This item fits: *2010-2012 Ford Mustang Coupe (All). This kit includes: 1 Left Side Quarter Window Scoop & 1 Right Side Quarter Window Scoop. The 3dCarbon side window scoops are manufactured in High Pressure polyurethane and attach to the side quarter windows. No screws or hole drilling is required. The scoops attach with OE approved 3M Double Face Tape. The scoops will require prepping, priming and painting prior to installation. 3dCarbon supplies a black vinyl panel to be applied to the outside of the glass prior to the scoop installation so the inside of the scoop is not visible from the inside of the car.

Product Description

Spindle: Type 84 with an inner journal dimension of 1 3/8" and an outer journal dimension of 1 1/16". Lubrication: Grease

• 3,500 lb Capacity, 5-4.5" Bolt Circle (2 5/8" center stud to center stud)
• Axle seats will come loose with axle and are required to be welded onto axle.
• 2 3/8" diameter x 3/16" nominal wall round tubing.
• Lubrication: Grease
• Equipped with E-Coated Kodiak Disc Brakes (Some assembly required)

Product Description

Valley Fifth Wheel Hitches with Glider work only with 15K and 16K models with in-bed installation bed rails. The glider prevents damage to cab or 6-1/2" short bed trucks. It glides hardware towards the tail gate of the truck bed approximately 9". It has a easy release lever for simple dependable manual operations. It ranges up to 16,000 pounds.

• Works only with 15K and 16K models with in-bed installation bed rails
• Glider prevents damage to cab or 6-1/2" short bed trucks
• Glides hardware towards the tail gate of the truck bed
• Easy release lever
• Ranges up to 16,000 pounds

Product Description

This rally-inspired accessory not only looks aggressive, it also channels air for increased downforce and vehicle stability.

• Limited Availability!! Please inquire with us before ordering!!
• Original Equipment
• Color Matched to Vehicle

Product Description

Model Specific Mounting Plate Features: Sturdy brackets can be mounted to the middle of the ATV frame in minutes. Mount kit is the only component left on the ATV when the plow is detached. Designed to not prohibit routine maintenance such as oil changes. Push Tube Features: Manufactured from heavy-duty, 1-1/2" steel tubing. Designed with maximum strength by triangulating the tubes. Features multiple swivel positions and 4-way adjustment at the cutting edge. BearForce Blades Feature: Manufactured from 12-gauge, heavy-duty steel. Features Teflon texture powder-coat paint. Spring-loaded to reduce jarring if hard object is hit. Includes heavy-duty adjustable skids. BearForce Pro-Series Blade Feature: Comparable plowing to that of large truck plows, at greatly reduced cost. Taller/deeper profile: 21" tall and 6" deep eliminates snow build-up. Boxed in blade construction for commercial strength. Blade has top and side reinforcement. Built-in top accessory bar for plow lights, flaps and markers. Manufacturer's limited lifetime warranty. State Plow Blade Features: Includes rubber flap. Poly XT Blades Features: Poly blade with RIB CORE technology. Available in black only. Lightweight blade is extremely efficient. Friendly to driveway surfaces and noticeably quiet when plowing. ATV Manual Lift Kit Features: Requires a low lift effort while achieving serious lift. Gets at least 5-1/2 of lift with as little as 25 lbs. of effort. Blade locks securely in the up position. ATV Front Rack Quick Lift Kit Features: Attaches to front rack with EZ mount system - no tools required. Ratcheting handle allows user to lock blade in any of four positions. Operates with minimal lifting effort. Works with most ATV plow systems.

• Sturdy brackets can be mounted to the middle of the ATV frame in minutes
• Push tube manufactured from heavy-duty, 1-1/2" steel tubing
• Blades manufactured from 12-gauge, heavy-duty steel
• Comparable plowing to that of large truck plows, at greatly reduced cost
• Manufacturer's limited lifetime warranty